Ribbon Breaking – Evolis Kiosk
There are two ways a ribbon can break. It can either be a straight cut or a jagged tear. If the ribbon break is a straight cut: Run a self test from the printer to eliminate the PC/software from the...
View ArticleClik here to view.
How to load magnetic cards – Evolis Kiosk
Load about 50 cards at a time and keep the hopper vertical.
View ArticleClik here to view.
Magnetic Encoder Test – Evolis Kiosk
If you are having issues with mag encoding failing or not verifying , check for correct orientation of the cards, try different cards , run a magnetic self test from your printer driver: 1. Open the...
View ArticleLow Card Sensor Installation – Evolis Kiosk
Click the link below for instructions on how to install the new Low Card Sensor for the Evolis Kiosk printer Low Card Sensor Installation Update the firmware to the current version
View ArticleEvolis Kiosk Updated Firmware
Evolis Kiosk Firmware update with added Low Card Sensor functionality: Download the zip file Kiosk3 1225. Unzip it and run the executable. Follow the written instructions
View ArticleClik here to view.
Testing a Smart Card reader in an Evolis printer
Download the PSCS application by clicking here Double click on the application and it will launch. Click Run Choose your printer from the drop down menu Choose the reader that is installed in the...
View ArticleFeeder not recognized – Evolis Kiosk
You can check to see if the feeder module manufacturer is set correctly if your Evolis Kiosk printer’s feeder module is not responding to a self test. The commands can be found here Escape commands for...
View Article